operation manual

Operation

If the 3 minutes have expired, disconnect and re-

connect the mains voltage to start the teach-in

mode again.

• Your device will automatically appear in the

Homematic IP app.

• To conﬁrm, please enter the last four digits of the

device number (SGTIN) in your app or scan the

QR code. Therefore, please see the sticker sup-

plied or attached to the device.

• Please wait until teach-in is completed.

• If teaching-in was successful, the LED lights up

green. The device is now ready for use.

• If the LED lights up red, please try again.

• Complete the setup of your blind actuator by fol-

lowing the instructions in the app.

• In the app, give the device a name and allocate

it to a room.

6 Operation

After setup, you can perform initial operating functions

via the external blind/shutter push-button:

• Short button press button S1 or S2: The motor for

the blinds/shutters/awnings moves into the cor-

responding end position.

• Short button press opposite direction: The mo-

tor stops.