operation manual

70
Manual operation
Heating
in heating
mode
P053 0
1
Heating in heating
mode deactivated
Heating in heating
mode activated
(default)
Selection
of heating
system
P055 0
1
2
3
4
Standard floor
heating (default)
Low energy floor
heating
Radiator
Passive convector
Active convector
For further information regarding the configura-
tion, please refer to the user manual of the
Homematic IP Wall Thermostat (HmIP-WTH-2).
8 Manual operation
8.1 Switch heating zones on/o
For installation and tests you can manually switch single
heating zones on or o. To switch single heating zones
on or o, please proceed as follows:
• Select the required channel using the select but-
ton (B) (see fig. 7).
• Press the select button until the LED (B) flashes
green three times.