operation manual

40
Start-up
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
To integrate the radiator thermostat into your system and
to enable control via the Homematic IP app, you must
teach-in the device to your Homematic IP Access Point
first.
To teach-in the radiator thermostat, please proceed as
follows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item “Teach-in device”.
• Open the lock of the battery compartment (E)
using the supplied four Allen head wrench (see
figure 2).
• Remove the battery compartment cover (B) to
the back and downwards to remove it from the
device (see figure 3).
• Remove the insulation strip from the battery
compartment of the radiator thermostat. The
teach-in mode remains activated for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (C)
shortly (see figure 4).