instructions

60
Configuration menu
6.3 Oset temperature
As the temperature is measured on the radiator
thermostat, the temperature distribution can vary
throughout a room. To adjust this, a temperature oset
of ±3.5 °C can be set. If a nominal temperature of e.g.
20 °C is set but the room presents with only 18 °C, an
oset of -2.0 °C needs to be set. An oset temperature
of 0.0° is set in the factory settings. To adjust the oset
temperature, please proceed as follows:
• Press and hold down the menu button (G) to
open the configuration menu.
• Select “Oset” via the plus and minus buttons (E
+ F) in the menu.
• Confirm with the menu button.
• Select the desired oset temperature using the
plus or minus button and confirm with the menu
button.
To confirm, the temperature flashes twice and the device
changes back to the standard display.
6.4 Programming a heating profile
In this menu item, you can create a heating profile with
heating and cooling phases according to your personal
needs.
• Press and hold down the menu button (G) to
open the configuration menu.
• Select “Prg” using the plus or minus buttons (E +