instructions

52
Start-up
• Select the menu item “Teach-in device”.
• Open the battery compartment (B) by pulling the
battery compartment down (see figure 3).
• Remove the insulation strip from the battery
compartment. Pairing mode remains activated
for 3 minutes (see figure 5).
You can manually start the teach-in mode for
another 3 minutes by pressing the system button
(D) briefly (see figure 5).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of
the device number (SGTIN) in your app or scan
the QR code. Therefore, please see the sticker
supplied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED (D) lights
up green. The device is now ready for use.
• If the LED lights up red, please try again.
• In the app, give the device a name and allocate
it to a room.