operation manual

40
Start-up
5 Start-up
5.1 Teaching-in
Please read this enre secon before starng
the teach-in procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
To integrate the radiator thermostat into your system and
enable it to communicate with other Homematic IP de-
vices, you must teach-in the device to your Homematic
IP Access Point first.
To teach-in the radiator thermostat, please proceed as
follows:
• Open the Homematic IP app on your smartphone.
• Select the menu item “Teach-in device”.
• Remove the insulation strip from the battery
compartment (D) of the radiator thermostat.
Teach-in mode remains activated for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (C)
shortly (see figure 3).