operation manual

73
Operating modes and configuration
6.6.3 Week profile
In the week profile, for each weekday of the selected
heating or cooling profile up to 6 heating phases (13
change settings) can be set separately. The programming
is carried out for the selected days, whereby tempera-
ture settings have to be set for the entire period between
00:00 and 23:59h.
• Select the number of the required profile in the
menu item “Pr.Ad by turning the control wheel (E)
and confirm by pressing the control wheel briefly.
• In the menu item “dAy” you can select single days
of the week, all weekdays, the weekend or the
entire week for your heating profile and confirm
by pressing the control wheel briefly.
• Confirm the start time 00:00 by pressing the
control wheel briefly.
• Select the desired temperature for the start time
by turning the control wheel and confirm by
pressing the control wheel briefly.
• The next time is shown in the display. You can
change this time using the control wheel.
• Select the desired temperature for the next pe-
riod by turning the control wheel and confirm by
pressing the control wheel briefly.
• Repeat this procedure until temperatures are
stored for the entire period between 0:00 and
23:59 h.