operation manual

69
Operating modes and configuration
6.6.1 Heating or cooling
You can use your floor heating system to heat rooms dur-
ing winter or to cool rooms during summer.
• Select “HEAT” for heating and “COOL” for cool-
ing in the menu item “type” by turning the control
wheel (E) and confirm by pressing the control
wheel briefly.
6.6.2 Week profile number
You can select between the following 6 pre-configured
profiles.
• Select the number of the required profile in the
menu item “Pr.nr.” by turning the control wheel
(E) and confirm by pressing the control wheel
briefly.
If the selected profile is a heating profile, the
room is heated as soon as the temperature falls
below the defined value. If the selected profile is
a cooling profile, the room is cooled as soon as
the temperature increases the defined value.
After switching from “heating” to “cooling” in the
menu, the profiles are changed from profile 1 to
4, profile 2 to 5 and from profile 3 to 6 automati-
cally.