operation manual

68
Operating modes and configuration
Number Meaning
0 Standard floor heating
1 Low energy floor heating
2 Radiator
3 Passive convector
4 Active convector
6.6 Programming the week profiles
You can use this menu item for configuring heating and
cooling profiles and to adjust the week profiles according
to your personal needs.
• Press and hold down the control wheel (E) to
open the configuration menu (see fig. 6).
• Select the
symbol by turning the control
wheel and confirm by pressing the control wheel
briefly.
• Turn the control wheel and select
- “type” for switching between heating (”HEAT”)
or cooling (”COOL”),
- “Pr.nr” to set the week profile number (”no. 1,
no. 2 ... no. 6”),
- “Pr.Ad” for individual settings of the week pro-
file and
- “OSSF” for activating (”On”) or deactivating
(”OFF”) the optimum start/stop function.