operation manual

66
Operating modes and configuration
• Select the start time and date by turning the con-
trol wheel and confirm by pressing the control
wheel briefly. “S” indicates a start time.
• Select the end time and date by turning the con-
trol wheel and confirm by pressing the control
wheel briefly. “E” indicates an end time.
• Set the temperature that you want to maintain
during the defined time using the control wheel
and confirm by pressing the control wheel briefly.
• By turning the control wheel you can select the
rooms for activating the holiday mode.
- Selection “OnE”:
The holiday mode is activated for the current
wall thermostat.
- Selection “ALL” (only relevant in connection
with a floor heating actuator):
The holiday mode is activated for all wall
thermostats that are connected to the floor
heating actuator.
6.4 Operating lock
Operation of the device can be locked to avoid settings
being changed unintended (e.g. through involuntary
touch). To activate the operating lock, please proceed as
follows:
• Press and hold down the control wheel (E) to
open the configuration menu (see fig. 6).
• Select the
symbol by turning the control wheel