operation manual

Start-up

To teach-in your wall thermostat to the Access Point,

please proceed as follows:

• Open the Homematic IP app on your smart-

phone.

• Select the menu item “Teach-in device”.

• After installation, the teach-in mode remains ac-

tivated for 3 minutes.

If the time has exceeded, you can manually re-

start the teach-in mode for another 3 minutes by

pressing the system button (D) brieﬂy (see ﬁgure

5).

• Your device will automatically appear in the

Homematic IP app.

• To conﬁrm, please enter the last four digits of the

device number (SGTIN) in your app or scan the

QR code. Therefore, please see the sticker sup-

plied or attached to the device.

• Please wait until teach-in is completed.

• If teaching-in was successful, the LED (D) lights

up green. The device is now ready for use.

• If the LED (D) lights up red, please try again.

• In the app, select in which applications you want

to use your device.

• Allocate the device to a room and give the device

a name.