operation manual

52
Hazard information
to carry out work on the 230 V mains. Applicable
accident prevention regulations must be com-
plied with whilst such work is being carried out.
To avoid electric shocks from the device, please
disconnect the mains voltage (trip the miniature
circuit-breaker). Non-compliance with the instal-
lation instructions can cause fire or introduce
other hazards.
When connecting to the device terminals, take
the permissible cables and cable cross sections
into account.
Please take the technical data (in particular the
maximum permissible switching capacity and the
type of load to be connected) into account be-
fore connecting a load! All load data relates to
ohmic loads. Do not
exceed the capacity specified
for the device.
Exceeding this capacity could lead to the de-
struction of the device, fires or electric shocks.
Before the actuator is connected, remove the
fuse from the fuse box
.
The device has not been designed to support
safety disconnection.