operation manual

Technical speciﬁcations

eQ-3 AG hereby declares that this device complies with

the essential requirements and other relevant regulations

of Directive 1999/5/EC. You can ﬁnd the full declaration

of conformity at www.eQ-3.de.

11 Technical speciﬁcations

Device short description:

HmIP-BSM

Supply voltage: 230 V/50 Hz

Current consumption: 5 A max.

Standby power consumption:

0.2 W

Max. switching capacity: 1150 W

Load type: ohmic load

Relay: Changeover contact

Cable type and cross section:

rigid and ﬂexible cable,

0.75-1.5 mm²

Installation:

only in normal com-

mercial switch boxes in

accordance with DIN

49073-1

Degree of protection: IP20

Measurement category: CAT III

Ambient temperature: 5 to 35 °C

Dimensions (W x H x D): 71 x 71 x 37 mm

Weight: 43 g

Radio frequency: 868.3 MHz/869.525 MHz

Receiver category: SRD category 2

Typ. open area RF range: 240 m

Duty cycle: < 1 % per h/< 10 % per h

Subject to technical changes.

Instructions for disposal

Do not dispose of the device with regular domes-

tic waste! Electronic equipment must be dis-

posed of at local collection points for waste elec-

tronic equipment in compliance with the Waste

Electrical and Electronic Equipment Directive.

Information about conformity

The CE sign is a free trading sign addressed ex-

clusively to the authorities and does not include

any warranty of any properties.

For technical support, please contact your retailer.