operation manual

Function and device overview

General system information

gent Homematic IP installation. Using existing or planned

switches and cabling reduces the installation costs to a

minimum. The design, colour and ﬁnish of switches that

have already been installed does not change, since exis-

ting frames and rockers can continue to be used.

Device overview (see ﬁgure 1):

(A)

System button (teach-in button and LED)

(B) Connecting terminal L

(phase conductor)

ply cable (Normally Closed))

(D) Connecting terminal for 2

(lamp/corresponding

supply cable (Normally Open))

(E) Connecting cable for N (neutral conductor)

Installation overview

Homematic IP

Switch Actuator

and meter

Example for

existing frame

Example for

adapter

Example for

existing rocker

4 General system information

This device is part of the Homematic IP smart home

system and works with the Homematic IP radio proto

col. All devices of the system can be conﬁgured com-

fortably and individually with a smartphone via the

Homematic IP app. The available functions provided

by the system in combination with other components

are described in the Homematic IP User Guide. All cur

rent technical documents and updates are provided at

www.eQ-3.de.

5 Adapters for brand switch systems

In order to achieve compatibility with as many manufac-

turers as possible and make integration in the dierent

designs easier, the following rocker adapters are available

as accessories. In exceptional cases the rocker holders or

frames from the dierent manufacturers may need to be

sawn or ﬁled for adaptation purposes.

*) Rocker holder adaptation required

**) Frame adaptation required.