operation manual

46
Restore factory settings
Short orange
flashing (every
10 s)
Teach-in
mode active
Please enter the last
four numbers of the
device serial number
to confirm (see “5.3
Teaching-in” on
page 41).
6x long red
flashing
Device defec-
tive
Please see your app
for error message or
contact your retailer.
1x orange and
1 x green light-
ing
Test display Once the test
display has stopped,
you can continue.
8 Restore factory settings
The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the switch actuator,
please proceed as follows:
• Press and hold down the system button (D) for 4
seconds until the device LED starts to flash quick-
ly orange (see figure 5).
• Release the system button again.