operation manual

42
Start-up
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the
operating manual of the Access Point.
To integrate the switch actuator into your system and en-
able it to communicate with other Homematic IP devices,
you must teach-in the device to your Homematic IP Ac-
cess Point first.
To teach-in the switch actuator, please proceed as fol-
lows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item “Teach-in device”.
• After installation, the teach-in mode remains ac-
tivated for 3 minutes.
If the time has exceeded, you can manually re-
start the teach-in mode for another 3 minutes by
pressing the system button (D) briefly (see figure
5).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the