operation manual

37
General system information
Device overview (see figure 1+2):
(A) Clip-on frame
(B) Electronic unit of the push-button
(C) Push-button “on” (channel 2)
(D) System button (teach-in button and LED)
(E) Push-button “o” (channel 1)
(F) Voltage supply unit
(G)
Connecting terminal L
(phase conductor)
(H) Connecting terminal for N (neutral conductor)
(I) Connecting terminal for 1 (corresponding
supply cable (Normally Closed))
(J) Connecting terminal for 2
(lamp/corresponding
supply cable (Normally Open))
4 General system information
This device is part of the Homematic IP smart home
system and works with the Homematic IP protocol. All
devices of the system can be configured comfortably
and individually with the user interface of the Central
Control Unit CCU3 or flexibly via the Homematic IP
smartphone app in connection with the Homematic IP
cloud. All available functions provided by the system
in combination with other components are described
in the Homematic IP Wired Installation Guide. All cur
-
rent technical documents and updates are provided at
www.eQ-3.com.