operation manual

34
Hazard information
In order for the device to be connected to the
supply voltage and the consumer load work
needs to be carried out on live voltage-carrying
parts. Before connecting the device, remove the
fuse from the fuse box.
The device may only be operated with an associ-
ated switch cover.
Please take the technical data (in particular the
maximum permissible switching capacity of the
relay and the type of load to be connected) into
account before connecting a load! All load data
relates to ohmic loads. Please do not exceed the
capacity specified for the actuator.
Exceeding this capacity could lead to the de-
struction of the device, fires or electric shocks.
Loads connected to the relay outputs require suf-
ficient insulation.
The device has not been designed to support
safety disconnection. The load is not isolated
from the mains.