operation manual
48
Start-up
Step 7 Connect the neutral conductor of the
motor to the neutral conductor of the
house installation.
Step 8 Secure the shutter actuator to the flush-
mounted box using the provided screws.
Please note that the system button (A) of
the actuator must be at the top left during
installation.
Step 9 Fit the adapter to the rocker (see figure 3).
Step 10 Now secure the rocker with the adapter
in the frame on the actuator.
Position the adapter so that both latching
lugs fit into the existing elongated holes
(see figure 4).
Step 11 Switch the fuse of the power circuit back
on again.
Step 12 Now the shutter actuator can be taught-
in to the Homematic IP Access Point (see
“6.3 Teaching-in” on page <ÜS>).