operation manual

16
Mounting into frames of other manufacturers
4 Mounting into frames of other
manufacturers
The push-button rocker is designed to fit into frames
supplied by the following manufacturers:
Manufacturer Frame
Berker S.1, B.1, B.3, B.7
Busch Jaeger carat*, future linear*, solo*, Busch-
axcent*, Busch-dynasty*, balance SI
ELSO Joy
GIRA Standard 55, E2, E22, Event, Esprit,
ClassiX, E3
merten 1-M, Atelier-M, M-Smart, M-Arc,
M-Star, M-Plan, M-Pure, System An-
tik*, System Fläche*, System Design*
JUNG A 500, AS 500, A plus, A creation
Kopp Athenis
*with 55 mm intermediate frames of the manufacturer
Heavy or large frames (e.g. glass) can not be held
solely by the rocker and should be fixed
additionally. For example, a multi-gang frame, in
which a socket module is screwed.