operation manual

53
Restore factory settings
1x long red
lighting
Transmission
failed or duty
cycle limit is
reached
Please try again (see
sec. „7.1 Command
not confirmed“ on
page 51 or „7.2
Duty cycle“ on page
51).
6x long red
flashing
Device
defective
Please see your app
for error message or
contact your retailer.
1x orange and
1 x green light-
ing
Test display Once the test
display has stopped,
you can continue.
8 Restore factory settings
The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the dimming actuator,
please proceed as follows:
• Remove the rocker and the adapter (if necessary).
• Press and hold down the system button (A) for 4 s
with a pointed object (e.g. a pen) until the LED will
start flashing orange quickly (see figure 6).
• Release the system button again.