operation manual
36
Hazard information
accident prevention regulations must be com-
plied with whilst such work is being carried out.
To avoid electric shocks from the device, please
disconnect the
mains voltage (trip the miniature
circuit-breaker).
Non-compliance with the instal-
lation instructions can cause fire or introduce
other hazards.
When connecting to the device terminals, take
the permissible cables and cable cross sections
into account.
Please take the technical data
(in particular the
maximum permissible eective installed load of
the dimming actuator and the type of load to be
connected) into account before connecting a
load! All load data relates to ohmic loads. Do not
exceed the capacity
specified for the actuator.
Exceeding this capacity could lead to the de-
struction of the device, fires or electric shocks.
Before the actuator is connected, remove the
fuse from the fuse box
.
Please note that 230 V LED lamps may glow or
flash while they are switched o due to the very
low power consumption.