User manual

Start-up

To teach-in the blind actuator, please proceed as follows:

• Open the Homematic IP app on your smart-

phone.

• Select the menu item “Teach-in device”.

• After installation, the teach-in mode of the device

remains activated for 3 minutes.

If the time has exceeded, you can manually re-

start the teach-in mode for another 3 minutes by

removing the rocker and pressing the system

button (A) shortly (see ﬁgure 5).

• Your device will automatically appear in the

Homematic IP app.

• To conﬁrm, please enter the last four digits of the

device number (SGTIN) in your app or scan the

QR code. Therefore, please see the sticker sup-

plied or attached to the device.

• Please wait until teach-in is completed.

• If teaching-in was successful, the LED lights up

green. The device is now ready for use.

• If the LED lights up red, please try again.

• Complete the setup of your blind actuator by fol-

lowing the instructions in the app.

• In the app, give the device a name and allocate

it to a room.