Instructions

41
Start-up
phone.
• Select the menu item “Teach-in device”.
• Open the lock (F) of the battery compartment (E)
using the supplied four Allen head wrench (see
figure 2).
• Remove the battery compartment cover (B) to
the back and downwards to remove it from the
device (see figure 3).
• Remove the insulation strip from the battery
compartment of the radiator thermostat. The
teach-in mode remains activated for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (C)
shortly (see figure 4).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED (C) lights
up green. The device is now ready for use. If the
LED lights up red, please try again.
• In the app, give the device a name and allocate
it to a room.