Instructions

45
Start-up
To teach-in the device, please proceed as follows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item “Teach-in device”.
• After installation, the teach-in mode remains ac-
tivated for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (E)
briefly (see figure 11).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, enter the last four digits of the device
number (SGTIN) in your app or scan the QR code.
Therefore, see the sticker supplied or attached to
the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED (E) lights
up green. The device is now ready for use.
• If the LED lights up red, please try again.
• Please select, in which application (e.g. climate
control) you would like to use the device.
• In the app, give the device a name and allocate
it to a room.