Instructions
36
Hazard information
The device is part of the building installation. Ob-
serve the relevant national standards and direc-
tives during planning and set-up. The device has
been designed solely for operation on a 230V/50
Hz AC supply. Only qualified electricians (to VDE
0100) are permitted to carry out work on the 230
V mains. Applicable accident prevention regula-
tions must be complied with whilst such work is
being carried out. To avoid electric shocks from
the device, please disconnect the
mains voltage
(trip the miniature circuit-breaker).
Non-compli-
ance with the installation instructions can cause
fire or introduce other hazards.
When connecting to the device terminals, take
the permissible cables and cable cross sections
into account.
Please take the technical data
(in particular the
maximum permissible switching capacity of the
relay and the type of load to be connected) into
account before connecting a load! All load data
relates to ohmic loads. Do not
exceed the capacity
specified for the device.
Exceeding this capacity could lead to the de-
struction of the device, fires or electric shocks.