Instructions

44
Start-up
Mounting bracket 45 degrees
Used for plane surfaces (such
as on a house wall) or for
mounting on a pipe.
Mounting bracket 0 degrees
Used for surfaces that are already at
a 45 degree angle.
5.4.1 Mounting on plane surfaces
To install the device, proceed as follows:
• Choose a site for installation.
• Select one of the supplied mounting brackets
depending on the condition of the mounting
surface (F or G).
• Position the mounting bracket to the desired
location.
• Mark two bore holes with the mounting bracket
used with a pen at the desired position (the
hole spacing can be seen from the labels on