Instructions
42
Function and device overview
Do not connect three-phase motors.
If you use the device/system in a security applica-
tion it has to be operated in connection with an
UPS (uninterruptible power supply) in order to
bridge possible power failure.
The device may only be operated within domes-
tic environment, in business and trade areas as
well as in small enterprises.
Using the device for any purpose other than that
described in this operating manual does not fall
within the scope of intended use and shall invali-
date any warranty or liability.
3 Function and device overview
The Homematic IP Blind Actuator – 4 channels can be
easily installed on a DIN rail within a distribution board.
Once installed, the device controls connected blinds,
shutters and awnings via four floating, independent
channels. The blind actuator oers comfortable control of
connected blind, shutter and awning drives via connected
push-buttons, remote controls or the free HomematicIP
smartphone app.
Furthermore, direct operation can be
realised via connected conventional push-buttons or
switches.