Data Sheet

28
Start-up
mann HAP1 HCP adapter required, ordering no.
170046)
• Liftronic 700-2/800-2 ( Hörmann HAP1 HCP ad-
apter required, ordering no. 170046
)
• RollMatic 2 (
Hörmann HAP1 HCP adapter requi-
red, ordering no. 170046
)
The device is an extension module and easily integrated
into compatible Hörmann drives.
• Remove the cover of the garage door drive (see
figure 2).
• Plug in the supplied connecting cable into con-
necting terminal (B) of the module (see figure 3).
• Plug the other end of the connecting cable into
the connecting terminal for the bus of the garage
door drive (see figure 4).
• Insert the module into the expansion slot of the
garage door drive provided (see figure 5).
• Put the cover back on (see figure 6).