User manual

Mounting

5 Mounting

Before starting to set-up the device, you have to connect the single com-

ponents of the weather sensor supplied. To do this, please proceed as

follows:

Step 1:

• Remove the not yet completely assembled weather sensor and

the anemometer (D) from the packaging.

• Put the anemometer to pipe 2 (F) above the main sensor (E).

• Please make sure that the notch of the rotary axis matches with

the screw hole.

• Fasten the anemometer with the screw.

Step 2:

• Loosen the cover of the rain sensor by slight-

ly turning it clockwise and slide it down.

Loosen the safety strip of the rain sensor and make sure that the

rainfall sensor and the counter rocker are inserted correctly (see

„10.2 Cleaning the rain sensor“ on page 39). The counter rock-

er should be able to change over smoothly.