User manual

31
Troubleshooting
be reached in isolated instances during start-up or initial installation of
a system. If the duty cycle is exceeded, this is indicated by one long red
lighting of the system LED (C), and may manifest itself in the device tem-
porarily working incorrectly. The device starts working correctly again af-
ter a short period (max. 1 hour).
8.4 Error codes and flashing sequences
Flashing code Meaning Solution
Short orange
flashing
Radio transmission/at-
tempting to transmit/
data transmission
Wait until the transmission is
completed.
1x long green
lighting
Transmission
confirmed
You can continue operation.
1x long red
lighting
Transmission failed
or duty cycle limit is
reached
Please try again (see sec.
„8.2 Command not con-
firmed“ on page 30 or
„8.3 Duty cycle“ on page
30).
Short orange
flashing (every
10 s)
Teach-in mode active Please enter the last four
numbers of the device serial
number to confirm (see „6
Teaching-in“ on page 27).
Short orange
lighting (after
green or red
confirmation)
Batteries empty Replace the batteries of the
device (see „7 Replacing
batteries“ on page 28).
6x long red
flashing
Device defective Please see your app for er-
ror message or contact your
retailer.
1x orange and 1 x
green lighting
Test display/
system start
Once the test display has
stopped, you can continue.