Instructions

42
Teaching-in
the teach-in mode.
The system LED (C) starts
flashing. Pairing mode remains activated for 3
minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button
(D) briefly using a pointed object (see figure 6).
Your device will automatically appear in the
Homematic IP app.
To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
Please wait until teach-in is completed.
If teaching-in was successful, the system LED
lights up green. The device is now ready for use.
If the system LED lights up red, please try again.
In the app, give the device a name and allocate
it to a room.
Slide the cover from the bottom onto the main
sensor and latch it into place by turning it an-
ti-clockwise.