User manual

41
Start-up
To integrate the wall-mount remote control into your
system and enable it to communicate with other
Homematic IP devices, you must connect the device to
your Homematic IP Access Point first.
To teach-in the wall-mount remote control, please pro-
ceed as follows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item “Teach-in device”.
• After installation, the teach-in mode remains ac-
tivated for 3 minutes.
If the time has exceeded, you can manually re-
start the teach-in mode for another 3 minutes by
removing the rocker and pressing the system
button (A) shortly (see fig. 5).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED lights up
green. The device is now ready for use.
• If the LED lights up red, please try again.