User manual

40
Start-up
Step 9 Now secure the rocker with the adapter
in the frame on the actuator.
Position the adapter so that both latching
lugs fit into the existing elongated holes
(see fig. 6).
Step 10 Switch the circuit breaker of the power
circuit back on again.
Step 11 Now, the wall-mount remote control
can be connected to the Homematic IP
Access Point (see “11.1 Teaching-in” on
page 40).
6.3 Teaching-in
Please read this entire section before starting
the teach-in procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2. For detailed information, please refer to
the Homematic IP User Guide, available for down-
load in the download area of www.eQ-3.com.