User manual

38
Start-up
Installation may only take place in normal
commercial switch boxes (device boxes) in
accordance with DIN 49073-1.
The device may only be operated with adapters
and an associated, fitted switch cover. The switch
cover may only be removed during configuration.
Please observe the hazard information in section
“2 Hazard information” on page 27 during in-
stallation .
Permitted cable cross sections for connecting to the
wall-mount remote control are:
rigid cable [mm
2
] flexible cable with/without
ferrule [mm
2
]
0.75 – 1.50 0.75 – 1.50
6.2 Installation
To install the wall-mount remote control, please proceed
as follows:
Step 1 Switch o the circuit breaker of the
power circuit.