User manual

30
Function and device overview
Before the actuator is connected, remove the
fuse from the fuse box .
Except for configuration, the device may only be
operated with an associated switch cover.
The device may only be operated within residen-
tial buildings.
Using the device for any purpose other than that
described in this operating manual does not fall
within the scope of intended use and shall invali-
date any warranty or liability.
3 Function and device overview
The Homematic IP Remote Control for brand switches is
used to control other Homematic IP devices and func-
tions via a push-button rocker. At the push of a button,
the eco mode for the heating system is activated, lights
are switched on and o or the panic light of a security
solution is switched.
The device is installed into empty flush-mounted boxes
or replaces already existing switches, if a phase as well as
a neutral conductor are available in the flush-mounted
box.