User manual

Restoring the factory settings

Short orange

lighting (after

green or red

conﬁrmation)

Batteries empty Replace the batteries of the

device (see „7 Replacing

batteries“ on page 41).

6x long red

ﬂashing

Device defective Please see your app for er-

ror message or contact your

retailer.

1x orange and

1 x green lighting

Test display/ system

start

Once the test display has

stopped, you can continue.

9 Restoring the factory settings

The factory settings of the device can be restored. If you do this,

you will lose all your settings.

To restore the factory settings of the weather sensor, please proceed as

follows:

• Loosen the cover of the main sensor (G) by turning the cylinder

clockwise and pulling it downwards.

• Press and hold down the system button (K) using a pointed ob-

ject, e.g. a pen (see ﬁg. 4) until the system LED (J) slowly starts

ﬂashing orange.

• Press and hold down the system button again until the system

LED starts quickly ﬂashing orange.

• Release the system button to ﬁnish restoring of the factory set-

tings.

• Slide the cover from the bottom onto the main sensor and latch

it into place by turning it anti-clockwise.

The system LED stops ﬂashing and the device performs a restart. After