User manual

First start-up

• Push the assembled end of the stainless steel mast (I) into the

ground until you are sure that the sensor will be stable.

If the weather sensor topples over, it may cause injury or damage

to vehicles and objects.

6 First start-up

6.1 Teaching-in

Please read this entire section before starting the teach-in pro-

cedure.

First set up your Homematic IP Access Point via the Homemat-

ic IP app to enable operation of other Homematic IP devices

within your system. For further information, please refer to the

operating manual of the Access Point.

You can connect the device either to the Access Point or to the

Homematic Central Control Unit CCU2. For detailed information,

please refer to the Homematic IP User Guide, available for down-

load in the download area of www.eQ-3.de.

To teach-in the weather sensor to the Access Point, please proceed as

follows:

• Open the Homematic IP app on your smartphone.

• Select the menu item “Teach-in device”.

• Loosen the cover of the main sensor (G) by turning the cylinder

clockwise and pulling it downwards.