User manual

35
Mounting
• Turn the supplied screws into the screw holes (front and back
side) to fasten the wind direction sensor.
• Slide the cover onto pipe 2 from the bottom to the top until it
reaches its end stop.
• Turn the cover anti-clockwise to fix it.
Step 2:
• Remove the anemometer (F) from its packaging.
• Put the anemometer to pipe 3 (H) above the main sensor (G).
• Please make sure that the notch of the rotary axis matches with
the screw hole.
• Fasten the anemometer with the screw.