User manual

Restore factory settings

1x orange

and 1 x green

lighting (after

inserting bat-

teries)

Test display Once the test display

has stopped, you can

continue.

Long and

short orange

ﬂashing (alter-

nating)

Device soft-

ware update

(OTAU)

Wait until the update

is completed.

11 Restore factory settings

The factory settings of the device can be re-

stored. If you do this, you will lose all your set-

tings.

To restore the factory settings of the motion detector,

please proceed as follows:

• To remove the

electronic unit (B)

of the motion

detector from the frame, take hold of the sides

of the electronic unit and pull it out (see ﬁgure

6).

• Remove the batteries.

• Insert the batteries ensuring that the polarity is

correct (see ﬁgure 7) while pressing and holding

down the system button (E) for 4 seconds at the

same time, until the LED will quickly start ﬂash-