User manual

37
Function test
7 Function test
The function test is only activated if the motion
detector has already been taught-in.
Up to 10 minutes after teaching-in or inserting the bat-
teries (if the device has already been taught-in), the de-
vice LED (E) indicates detected movements. Meanwhile,
the device LED flashes red. In this way, the detection
range and sensitivity can be checked directly on the de-
vice.
8 Operation
Both push-buttons (C+F) of the motion detector are de-
fined as button pairs. The upper button (C) can carry out
the functions “on/brighter/up/eco”, the lower button (F)
the functions “o/darker/down/auto”.
You can define the push-button functions according
to your personal needs, e.g. for comfortably switching
lights on and o or to activate or deactivate the eco
mode.