User manual

36
Start-up
You can manually start the teach-in mode for
another 3 minutes by pressing the system button
(E) briefly (see figure 5).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of
the device number (SGTIN) in your app or scan
the QR code. Therefore, please see the sticker
supplied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the device LED (E)
lights up green. The device is now ready for use.
If the device LED (E) lights up red, please try again.
After teach-in has been completed, the motion
detector starts its function test (see “7 Function
test” on page 37).
• Please select, in which application (e.g. light and/
or security) you would like to use the device.
• Allocate the device to a room and give the de-
vice a name.