User manual

35
Teaching-in
remove the electronic unit (A) from the cover (E) to
open the battery compartment cover (C) (see fig. 3).
• Remove the insulation strip from the battery
compartment (C) to activate the device. Teach-in
mode remains activated for 3 minutes.
You can manually start the teach-in mode for another
3 minutes by pressing the system button (D) briefly
(see fig. 7).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the de-
vice number (SGTIN) in your app or scan the QR code.
Therefore, please see the sticker supplied or attached
to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED (D) lights up
green. The device is now ready for use.
• If the LED lights up red, please try again.
• Please select, in which application (e.g. security and/
or light) you would like to use the device.
• Allocate the device to a room and give the device a
name.
• Reattach the cover (E) .