User manual

31
Start-up
5.2 Mounting
Please read this entire section before starting to
mount the device.
You can use the supplied clip-on frame (A) to mount the
temperature and humiditiy sensor or easily integrate it
into an existing switch systems (see „5.2.4 Installation in
multiple combinations“ on page 35).
If you want to mount the temperature and humidity
sensor with the supplied clip-on frame, you can use
• the supplied double-sided adhesive strips or
• the supplied screws
to fix it to a wall.
You can also mount the temperature and humidity sensor
on a flush-mounting box.
5.2.1 Adhesive strip mounting
For mounting the assembled device with adhesive strips,
please proceed as follows:
• Choose a site for installation.
Make sure that the mounting surface is smooth,
solid, non-disturbed, free of dust, grease and
solvents and not too cold to ensure long-time
adherence.