User manual

29
Start-up
Guide. All current technical documents and updates are
provided at www.eQ-3.de.
5 Start-up
5.1 Teaching-in
Please read this entire section before starting
the teach-in procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2. For detailed information, please refer to
the Homematic IP User Guide, available for down-
load in the download area of www.eQ-3.de.
To integrate the temperature and humidity sensor into
your system and enable it to communicate with other
Homematic IP devices, you must teach-in the device to
your Homematic IP Access Point first.
To teach-in the temperature and humiditiy sensor, please
proceed as follows: