User manual

44
Start-up
You can connect the device either to the Access Point or to the
Homematic Central Control Unit CCU2. For detailed information,
please refer to the Homematic IP User Guide, available for down-
load in the download area of www.eQ-3.de.
To teach-in your floor heating actuator to the Access Point, please pro-
ceed as follows:
• Open the Homematic IP app on your smartphone.
• Select the menu item “Teach-in device”.
• Briefly press the system button (A) until the LED quickly starts
flashing orange (see fig. 7). The teach-in mode of the selected
channel remains activated for 3 minutes.
You can manually start the teach-in mode for another 3 minutes
by pressing the system button (A) briefly (see fig. 7).
• Your device will automatically appear in the Homematic IP app.
• To confirm, please enter the last four digits of the device number
(SGTIN) in your app or scan the QR code. Therefore, please see
the sticker supplied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED lights up green. The device
is now ready for use.
• If the LED lights up red, please try again.
• Select the desired solution for your device.
• In the app, give the device a name and allocate it to a room.