User manual

33
Start-up
You can manually start the teach-in mode for
another 3 minutes by pressing the system button
(E) briefly (see figure 5).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of
the device number (SGTIN) in your app or scan
the QR code. Therefore, please see the sticker
supplied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the device LED (E)
lights up green. The device is now ready for use.
• Select the desired solution for your device.
• Allocate the device to a room and give the
device a name.
If the device LED (E) lights up red, please try
again.
Once the batteries have been inserted, it will
take around 30 seconds before the device will
be ready for operation. No motion will be
detected during this time.
After teach-in has been completed, the motion
detector starts its function test (see “7 Function
test” on page 34).