User manual

29
Troubleshooting
in processes mean that it may be reached in isolated in-
stances during start-up or initial installation of a system. If
the duty cycle is exceeded, this is indicated by three long
flashes of the device LED, and may manifest itself in the
device temporarily working incorrectly. The device starts
working correctly again after a short period (max. 1 hour).
8.3 Error codes and flashing sequences
Flashing code Meaning Solution
Short orange
flashing
Radio trans-
mission/at-
tempting to
transmit
PPlease wait, until
transmission has
been confirmed.
1x long green
lighting
Transmission
confirmed
You can continue
operation.
1x long red
lighting
Transmission
failed
Please try again
(s. “8.1 Command
not confirmed” on
page 28).
Short orange
flashing (every
10 seconds)
Teach-in
mode active
Please enter the
last four numbers
of the device
number to confirm
(see “5.1 Installa-
tion and teaching-
in” on page 25).