User manual

14
General information
4 General information
This device is a component of the HomeMatic IP home
control system and can be combined with all Homemat-
icIP devices with the dimensions of 55 x 55 mm (see sec.
“5 Start-up” on page 14).
Also, battery operated devices with the dimensions of
55 x 55 mm of other systems (e.g. HomeMatic, MAX! or
FS20) can be used with the desk stand.
All current technical documents and updates are pro-
vided at www.eQ-3.de.
eQ-3 AG hereby declares that this device complies with
the essential requirements and other relevant regulations
of Directive 1999/5/EC. You can find the full declaration
of conformity at www.homematic-ip.com.
5 Start-up
To start up the desk stand, please proceed as follows:
• Open the battery compartment (C) in the base (B)
of the desk stand (see fig. 3).
• Insert two new 1.5 V LR6/mignon/AA batteries
into the battery compartment, making sure that
you insert them the right way round (see figure 4).
• Insert the desired device with the dimension of 55
x 55 mm (e.g. a Homematic IP Wall-mount Re-
mote Control) into the desk stand (see figure 5).