User manual

43
Operation
6 Operation
After teaching-in and mounting have been performed,
simple operations are available directly on the device.
If the radiator thermostat is in standby mode,
please press the control wheel (E) once before
operation to activate the device.
• Temperature: Turn the control wheel (E) to the
right or to the left to manually change the tem-
perature of the radiator. In automatic mode, the
manually set temperature will remain the same
until the next point at which the profile changes.
Afterwards, the defined heating profile will be
activated again. During manual operation, the
temperature remains activated until the next
manual change.
• Manual and automatic mode: Press and hold
down the control wheel (E) to switch between
manual and automatic mode. In automatic
mode, the defined heating profile of the Home-
matic IP app is active. In manual operation, the
temperature can be set directly on the device or
via the app and will remain active until the next
manual change.
• Boost function: Press the control wheel (E)
shortly to activate the boost function for heat-
ing up the radiator quickly and briefly by opening